Products: Insulated Panels: ABP Wall Panel

ABP Wall Panel

Description:

The ABP Wall Panel is similar in appearance to the IPP panel. The exterior profile is asymmetrical with expanded flat areas to reduce shadow lines. As with all IPS panels, the interior skin is fabricated in the Mesa profile.

Dimensions:

The product is available in 2", 2-1/2", or 3", thick and can achieve R-Values to 23.9. The manufactured net width can be 36" or 42". Typical embossed exterior skins are provided in 24 or 22 gauge steel. The maximum recommended length for the ABP Panel is 30'0". Contact IPS for panel length options. Panel connections are made into structural members with concealed clips and fasteners.

Material:

Exterior -	24 ga. steel (std). 22 ga. also available.
Interior -	26 ga. steel (std). 24 and 22 ga. also available.

Finish Options:

Exterior -	Signature® 200 (silicone polyester) Signature® 300 (Kynar 500®/Hylar 5000®)
Interior -	USDA White (standard) Signature® 200 (silicone polyester)

Colors:

IPS Panel Color and Finish Guide

Texture:

The exterior and interior skins are embossed only.

Length:

The maximum recommended length is 30' 0". Contact IPS for panel length options. IPS offers standard details for stack joint applications for walls over 30' 0" high.

Fasteners:

Concealed, 14 ga. steel clip.

Test Data

Test	Purpose	Procedure	Results
Thermal Resistance	Determines insulating properties of the panels	ASTM C236 Guarded Hot Box	Good R values for an HCFC Foam System (see published values for panel type and thickness)

Air Leakage	Measures air leakage through the panel joints	ASTM E283 Chamber Method	The leakage rate for panel will not exceed 0.01 CFM/SF at 40 psf pressure differential

Water Penetration	Measures water leakage through the panel joints	ASTM E331 Chamber Method	No water penetration at pressure differential of 50 psf

Strength	Determines the load/span properties of the roof and wall panels	ASTM E72 Chamber Method	Panel load/span and deflection tables are available

Surface Burning	Determines the surface burning characteristics of the core and panels	Underwriters Laboratories UL 723 (ASTM E84)	Core Material (5") Flame Spread 20* Smoke Developed 400 Finished Panel 2" to 5" Wall Panel Flame Spread 15* Smoke Developed 250 - 450
Surface Burning		Factory Mutual ASTM E84	Core Material (5") Flame Spread 25* Smoke Developed 180

Room Fire Test	Evaluates the burning of roof and wall panels in a room configuration	Factory Mutual STD. 4880 (1994) (UBC 26-3)	Panel is rated Class 1 to 30 ft. high, 5 in. max. thickness

*The numerical flame spread rating is not intended to reflect hazards
presented by this or any other material under actual fire conditions.

Thermal Properties

ABP Wall Panel
Product Code	Thickness	"U" Factor	"R" Factor
ABP 200	2"	.063	16.0
ABP 250	2 1/2"	.050	19.9
ABP 300	3"	.042	23.9

Note: Insulation values determined by tests conducted in accordance with ASTM C236
at a mean temperature of 75 degrees F., winter condition corrected to 15 mph outside and still inside.